型号 C0636A×750 C0632A×1000 C0636A×750 C0636A×1000 回转直径 330mm(13") 360mm(14") Swing over cross slide 198mm(7-25/32") 212mm(8-1/6") Swing in gap diameter 476mm(18-3/4") 491mm(9-1/3") Swing in length 210mm(8-1/4") 210mm(8-1/4") Center height 166mm(6-1/2") 166mm(6-1/2") Admits between 750mm(30") 1000mm(40") 750mm(30") 1000mm(40") Bed width 187mm(7-3/8") 187mm(7-3/8") Bed length 1248mm(49-1/8") 1655mm(65-1/8") 1363mm(53-2/3") 1655mm(65-1/8") Spindle bore 38mm(1-1/2") 38mm(1-1/2") Spindle nose D1-4" or A2-4" D1-4" or A2-4" Taper in nose NO.5 morse NO.5 morse Taper in sleeve NO.3 morse NO.3 morse Speeds number 8 or 16(pole changeable motor) (optional) 8 or 16(pole changeable motor) (optional) Speeds range 70-2000r.p.m.or 35-2000r.p.m.(2 speed motor) 70-2000r.p.m.or 35-2000r.p.m.(2 speed motor) Cross slide travel 160mm(6-5/16") 118mm(4-5/16") Compound rest travel 68mm(2-11/16") 68mm(2-11/16") Lead screw thread 8T.P.I. or 3mm pitch 8T.P.I. or 3mm pitch Feed rod diameter 19mm(3/4") 19mm(3/4") Cutting tool max section 16mm×16mm(5/8"×5/8") 16mm×16mm(5/8"×5/8") Threads imperial pitches 36 Nos.8-112 T.P.I. or (34 Nos.4-56T.P.I) 36 Nos.8-112 T.P.I. or (34 Nos.4-56T.P.I) Threads metric pitches 28 Nos.0.2-5mm pitch or (26 Nos.0.4-7mm pitch) 28 Nos.0.2-5mm pitch or (26 Nos.0.4-7mm pitch) Threads diametral pitches 36 Nos.8-112 D.P 36 Nos.8-112 D.P Threads module pitches 22 Nos.0.2-3 M.P. 22 Nos.0.2-3 M.P. Longitudinal feeds imperial 36 Nos.0.0019-0.0273"/Rev.or (32 Nos.0.002-0.548"/Rev) 36 Nos.0.0019-0.0273"/Rev.or (32 Nos.0.002-0.548"/Rev) Longitudinal feeds metric 36 Nos.0.050-0.696"/Rev.or (32 Nos.0.052-0.392mm/Rev) 36 Nos.0.050-0.696"/Rev.or (32 Nos.0.052-0.392mm/Rev) Cross feeds imperial 36 Nos.0.0006-0.0094"/Rev.or (32 Nos.0.007-0.0187"/Rev) 36 Nos.0.0006-0.0094"/Rev.or (32 Nos.0.007-0.0187"/Rev) Cross feeds metric 36 Nos.0.013-0.188"/Rev.or (32 Nos.0.014-0.380mm/Rev) 36 Nos.0.013-0.188"/Rev.or (32 Nos.0.014-0.380mm/Rev) Quill diameter 32mm(1-1/4")(NO.3M.T.) 32mm(1-1/4")(NO.3M.T.) or (optional) Quill travel 100mm(3-15/16")(NO.3M.T.) 100mm(3-15/16")(NO.3M.T.) or (optional) Quill taper NO.3 morse NO.3 morse For main motor 1.5KW 3PH or 1PH 1.5KW 3PH or 1PH